Montana Auction Company

Agricultural, Equipment, Real Estate, Household, Antiques

Please scroll down to view upcoming

auctions 

Bob McGinnis Real Estate

 and Personal Property Auction

Saturday, November 4th, 2017 9:00am MST Sidney, MT

Location: East Main St. Sidney, MT, Directly North from Farm & Home
Directions: Take Sidney Truck Route from Central Ave. to sale site. Watch for signs


Real Estate offered at 2:00 pm MST

The following property will be offered at public auction. Final bid will be subject to sellers's approval. The seller reserves the right to accept or reject any and all bids.

Legal Description: KENOYER ADD (SIDNEY), S33, T23 N, R59 E, BLOCK 009, Lot 00A, TRACT A TRACT B AND TRACT A IN TR D LESS ST HY BLK-9 KNY ADD
All property located in KENOYER SUBDIVISION 

Real Estate Viewing Dates: By appointment, contact Dan Goss 406-480-2778

Property Location: 

3rd Street NE
Sidney, MT

Being offered at auction is a +/- 16,553 sq. ft. commercial lot with a +/- 2,400 sq ft. shop and warehouse. Property is situated directly on the Sidney truck route with access to both the truck route and 3rd St. NE. This would make a great location for a commercial warehouse, storage area, or for a new commercial business or the expansion of an existing business. Shop has plenty of space for floor hoists or for storing commercial equipment. Please contact Dan Goss 406 480 2778 for more information.



Mineral Rights: All minerals are reserved.

Taxes: Taxes will be prorated from day of closing

Closing Costs: Seller will pay all normal closing costs. Buyer to pay any cost associated with financing.

Title Insurance: Standard owner’s title insurance will be provided by the seller through Richland County Title Co. Sidney, MT 59270 (406) 433-8584


Real Estate Terms: Cash. The highest accepted bidder will be required to enter into a written buy-sell agreement and tender a ten-per- cent (10%) non-refundable down payment at the conclusion of the auction. Title will be transferred by warranty deed with title insurance. The balance is due in cash at closing on or before Monday, December 4th 2017 (Seller will be open to early closing if buyer so desires.) at the office of: Richland County Title, 1050 S. Central Ave, Sidney, MT 59270 (406) 433-8584. All funds shall be held in the escrow account of Richland County Title, 1050 S. Central Ave, Sidney, MT 59270 (406) 433-8584. Your bid is considered acceptance of the terms of this auction. If you, the Buyer, fail to close, the down payment is non-refundable. If the Sellers fail to close, 100% of the down payment will be returned. At this time there is no known reason that the Seller would not be able to close. All information is from sources deemed reliable, but is not guaranteed by the Seller or the Auctioneers. Offering is subject to error, omission, and approval of purchase by owner. We urge independent verification of each and every item submitted to the satisfaction of any prospective buyer. It is every potential bidder/purchaser’s sole responsibility to accomplish his or her due diligence in whatever manner he or she deems advisable prior to sale time. The Auctioneer/Auction Company shall not be responsible or liable in any way if the seller fails to honor any bid, or refuses or cannot close title in accordance with the winning bid or any contract entered in respect thereof. Announcements made sale day take precedence over any printed or internet materials. The property sells "As is-Where is." MONTANA AUCTION COMPANY, BADLANDS AUCTION & APPRAISAL and its auctioneers are acting solely as auctioneers for the seller. For More Information Contact: DAN GOSS, AUCTIONEER - (406) 480-2778 Sidney, MT - MONTANA AUCTION COMPANY SIDNEY, MONTANA 59270

Tools and Shop Equipment

Hammeson 10 ton floor hoist
Weaver 2 post floor hoist
South Bend metal lathe, belt drive, 15' swing, 6 ft bed, works great
South Bend metal lathe, 3 ft bed, needs work
Thor valve grinder and Sioux valve grinding set
Briggs and Stratton 10hp pressure washer
Briggs and Stratton 11hp 6000w generator
McCulloch 2000w generator
Lincoln Ideal Arc SP100 wire welder
Thermal Dynamics  PAK 2xt plasma cutter
Kawasaki 21.6 v cordless tool set
Chicago Electric cordless tool sets
(2) Porter Cable coil air nailer
Pit bull 10 ton porta-power
JET bearing spillter
JET Dril press
DuraCraft drill press
Rockford parts washer
Omaha Industrial  2hp bench grinder
6" bench grinder
Makita chop saw
Craftsman buffer
Lots of air impact wrenches (1/2, 3/4, 1")
Air chisels and grinders
All American 3 tier tool box
(2) 8 drawer MAC tools bottom tool boxes
1/2' Williams sockets
3/4 drive Owatonna torque wrench
Pittsburgh 3/4 drive ratchet set
Thorsen 3/4 drive socket set
S-K 3/4 drive socket set
Crestline 3/4 drive socket set
Other 3/4 drive socket sets
Tap and Die sets
Ridgid pipe wrenches 24"-48"
Proto hand tools display board
Slide hammers
Pipe threaders
Gear pullers
Ridge reamers
Calipers
Seal pullers
Large end wrench sets
Numerous end wrench sets, metric and SAE
Rockford impact swivel sockets
Makita 6" angle grinder
3 phase Westinghouse air compressor
Numerous bottle jacks
Hydraulic press
Air jacks 
Bumper jacks
4 and 5 ton truck floor jacks
Transmission Jack
Numerous large bench vises
Large "A" frame hoist
Large antique screw jacks
Battery chargers
Engine stand
Engine hoist
2 ton chain hoist
1 ton chain hoist
Numerous heavy duty work benches
170,000 BTU kerosene heater
Pnuematic waste oil tank
Oxy/Acetylene bottles and torch
Shop Dolly
Jack stands
Truck bearing socket set
Lots hydraulic pumps, hoses, fittings
Montgomery Ward transit and stand
Large assortment of repair manuals (Cat, Case, Chilton, I&T)

Disclaimer for firearms:


Must be 18 to bid on long guns and 21 to bid on handguns. Handguns sold only to MT residents. Handguns may be transferred to FFL in buyers home state at buyers expense. All buyers MUST be able to pass federal back ground check to purchase firearms. Background checks and firearms pickup will be performed at High Caliber Sports, 440 N. Central, Sidney, MT. All local, state, and federal laws apply


Rifles & Shotguns


Wichester 94 Commemorative Canadian Centennial 67' 30-30

Savage Model 16 300 Winchester Short Mag Stainless

Ruger M77 MK II .270 Skeletonized "Boat Paddle" Stock Stainless

Centruy Arms R1A1 .308 w/ wood stock and bipod

Ruger M77 7mm Mag Tang Safety

Remington 700 VTR .308 w/ Ultimitate Sniper Major Plaster stock and Pentax Scope

Winchester Model 37 12ga Break open

Mossberg 835 Ulti Mag 12ga 2 3/4 - 3 1/2"

Marlin Model 93 Bolt .22 WMR

Winchester Commemorative Antler Game w/ Box and Documents

Marlin .22 Western Auto Supply model 150

Marlin .22 model 60 semi-auto

Remington Model 521 .22 bolt action

Remington Model 700 7mm Mag, LEFT HANDED

Marlin Model A1, 22, semi-auto with factory peep sights

Savage model 99, 30-30, lever action

Remington Model 1148 semi auto 12 gauge



Pistols & Revolvers


Thompson Center Contender w/ 4 barrels, .22 LR, 44 Mag, 25/35 and .222

Kimber Micro Carry .380 Two Tone

Smith & Wesson 32-20 Nickle Vintage

Heritage Rough Rider .22LR Revolver (Two of these)

Ruger Super Blackhawk .44 Mag 

Uberti 1873 Cattleman Bisley 44-40

CZ 61 Pistol 7.65 cal with case holster and accessories

Ruger MK III Bull Barrel .22LR

Cimarron 1858 Remington Army .44 ca


Ammunition and Primers


CCI .22LR Suppressor Subsonic Hollow point (50 Boxes with 50 Rounds each box)

Hornady 17 Hornet (10 Boxes with 25 rounder per box)

Remington Subsonic .22LR Hollow point (6 Bricks of 500 Rounds)

CCI Stinger .22LR (18 Boxes of 50 Rounds per box)

CCI .22 WMR Maxi-Mag TNT (80 Boxes of 50 or 8 Bricks of 500)

CCI Small Pistol Primers (5 Boxes of 1000)

CCI Large Pistol Primers (4 Boxes of 1000)


Trucks and Vehicles


1997 Ford f350, 7.3 Diesel, 5 sped manual, 4x4, flatbed, rebuilt front end, new tires, 265,000 miles, 130,000 on new engine

1994 Chevy 1 ton, 4wd, 5 spd manual, 454, new clutch and fuel pump, new high output oil pump, brand new flat bed, runs great, 234,000 miles

1998 Jeep Cherokee Laredo, 6 cylinder, auto, leather, loaded, clean runs great, 166,376 miles

1982 GMC Sierra, 3/4 ton, with rebuilt Goodwrench 350, 4 spd, runs good, needs fuel tank

1967 Chevy C50 grain truck, rebuilt 350, 4+2 transmission, 16 ft. steel box and hoist, runs great 

1991 GMC Top Kick, 366 propane, 5+2 manual transmission, 16ft bed w /scale and display

1985 International, DT466 diesel, manual transmission, needs head gasket

1980 Ford F700, propane small block Ford, 5+2 transmission, 11.5 ft. bed with ball

1955 M55 deuce and a half 6x6 fire truck, runs good, originally from Glasgow Air Force Base

1952 Chevrolet Loadmaster, large corner windows, beet box

1942 Ford 1 1/2 ton truck, straight 6, tail roll bed with gin poles and winch, great project truck


Motorcycles


2001 Kawasaki KE 100, always kept inside, runs great

1987 Yamaha XT 250

1979 Kawasaki KX 80

1975 Yamaha Chappy, very collectible

1970 Honda Trail 90, good original condition


Trailers


36' Hinman flatbed, gooseneck trailer, 3 axle, open steel deck, 8,000lb. warn winch

30' Ranger Trail All, flatbed, gooseneck trailer, 3 axle, hydraulic beavertail, steel deck, winch 

(2) military fuel transports, pintle hitch, 11.00-20 military tires



Collectible Tractors


International Harvester 806, PTO

Fordson 9N, good running condition

Ford 8N, good condition

John Deere model A, styled, single front wheel, 42" rear tires, good project tractor

Case DC tricycle with 3 point, good paint

Fordson Major Diesel, 3 point, PTO

Fordson Super Major Diesel, 3 point, PTO

Fordson Major Diesel, 3 point

Case CC narrow front, good sheet metal

Case VAC narrow front

McCormick Deering WD9

Farmall H wide front

Ford Major Diesel parts tractor

Massey Harris 44 w/ loader, parts tractor

John Deere 110 Patio Model garden tractor, Yellow Edition

Montgomery Ward walk behind garden tractor, Wisconsin engine, w/ mower, cultivator, and plow

Case Waukseha power plant


Stationary Engines


1 1/2 IHC Type M on cart, runs good

1 1/2 John Deere E, complete, good project engine


Fork lifts and Other Equipment


Caterpillar fork lift, needs work

Yale fork lift for parts

Mobility fork lift, Made in Fargo, ND, needs work

Skidsteer hydraulic grapple pipe forks

3 bottom spinner plow

Model 880 6 bottom plow

Sherman model 1402 loader

Duall model 100 loader

Tasko Lightning weeder

3 point post hole auger

(3) 20'x24" culverts brand new, never used